A Spec Auto Specialties & Customs

Performance services

Track prep, suspension, and brake upgrades in Ocala, FL

A factory street alignment is the wrong target for a car headed to the road course or the strip. We set suspension and brakes for the way you actually use the vehicle.

The short answer

A Spec Auto Specialties & Customs prepares cars in Ocala for the street, the strip, and the road course, with suspension and brake upgrades — including Brembo, KW, and Bilstein hardware — plus alignment work set for how you actually drive.

Drivers in the Ocala area preparing for road-course days at The FIRM near St. Augustine, or for launches at Gainesville Raceway, need suspension and brakes set for those conditions — not only for a commute. At A Spec Auto Specialties & Customs we install hardware such as Brembo brake systems and KW and Bilstein coilovers or dampers, then align and check the car so it can be driven hard without the setup fighting the driver. We also handle performance pads, high-temperature fluid, braided lines, sway bars, and adjustable arms selected for the platform and the use. Daily drivers that need better street manners are welcome too; we will not pretend a track alignment is the right answer for a car that never leaves the highway.

Key facts

  • Hardware we install: Brembo brake systems; KW and Bilstein coilovers and dampers
  • Supporting parts can include performance pads, high-temperature fluid, braided lines, sway bars, and adjustable arms
  • Track and strip context drivers often mention: Gainesville Raceway; also The FIRM, which is near St. Augustine
  • Shop: 422 SW 16th St, Ocala, FL 34471

What track prep, suspension, and brake work do we offer?

Coilover and damper installation

We install KW, Bilstein, and similar performance suspension components, then set ride height and starting damper adjustments for the intended use.

Alignment and corner setup

We align the car to a target that matches street, strip, or road-course use, rather than leaving it on a generic factory spec that does not fit the job.

Big-brake upgrades

We install Brembo and other performance brake systems, with pads, fluid, and lines chosen for the heat and speed you expect.

Street and event prep

Before a track day or a test at the strip, we can inspect the car, check fluids, and look for loose or worn parts that should not go down the road.

How do we set up a car for the street, the strip, or the track?

  1. 01

    Talk through how you use the car

    Street, mixed use, road course, or strip — the setup changes with the job, and we start there.

  2. 02

    Inspect the current suspension and brakes

    Worn bushings, leaking dampers, or glazed pads will undo a new set of parts, so we check those first.

  3. 03

    Install and set the hardware

    We fit the components, set ride height and a starting alignment, and bleed and check the brakes.

  4. 04

    Review the setup with you

    We explain what was set, what you should recheck after the first miles or the first event, and what to watch for.

Which suspension and brake hardware do we install?

  • American muscle
  • European and exotic
  • JDM and imports
  • Performance trucks

Suspension and brake hardware we install: Brembo brake systems, KW and Bilstein coilovers and dampers, plus performance pads, high-temperature brake fluids, braided lines, sway bars, and adjustable arms selected for your platform and use.

American muscle

Mustang, Camaro, Corvette, and Challenger/Charger street and event setups.

European and exotic

BMW, Porsche, and other European performance platforms, including cars that see road-course use.

JDM and imports

Subaru, Mitsubishi, Nissan, Toyota, Honda, and other import chassis.

Performance trucks

Truck handling and brake upgrades, quoted after we see how the vehicle is used.

Technician inspecting a performance wheel and tire on a lift

Track Prep, Suspension & Brakes

Tell us what you drive, where you use it, and what bothers you about the current ride or brakes. We will recommend parts and a setup you can review before we start. Call (352) 304-3237 or visit 422 SW 16th St, Ocala, FL 34471.

Frequently asked questions

Can you set my car up only for the street?

Yes. Not every job is a track car. We will set ride height, alignment, and brake parts for how you actually drive, including a daily driver that just needs the suspension or brakes brought back to a healthy, predictable state.

Do you work on cars that go to Gainesville Raceway or The FIRM?

Those are the track and strip locations we hear about most from local drivers, and we prep cars with that use in mind. We do not claim an official partnership with either facility; we simply set the car so it can be used there with hardware and an alignment that match the job.

Do new brakes or coilovers need a break-in?

Most performance pads and many rotors need a bedding procedure, and new suspension should be rechecked after the first miles. We will tell you what the parts you received require and what we want to see on a follow-up alignment if the springs settle.

Updated

Get a quote

Request a custom build quote

Tell us what you drive, where you use it, and what bothers you about the current ride or brakes. We will recommend parts and a setup you can review before we start. Call (352) 304-3237 or visit 422 SW 16th St, Ocala, FL 34471.

Need the car looked at? Call A Spec and we will talk through the next step.

Call (352) 304-3237, email info@ocalaautorepairshop.com, or request an appointment. The shop is open Monday–Friday, 9:00 AM to 5:00 PM.

Location of A Spec Auto Specialties & Customs

A Spec Auto Specialties & Customs

422 SW 16th St
Ocala, FL 34471
(352) 304-3237

Monday–Friday, 9:00 AM to 5:00 PM. Closed Saturday and Sunday.

Call (352) 304-3237Book service